Guide To Flash Stock ROM Samsung GALAXY J1 ACE (J110F) Using ODIN v3.10.7

Flash Stock Firmware On Samsung GALAXY J1 ACE (J110F). This article is guide to flash a stock ROM on Samsung GALAXY J1 ACE (J110F) using Odin V3.10.7 software. Before you decide to use this guide, we recommend using Samsung’s own utilities, Samsung Kies and OTA (Over-the-air). Only use this guide if you are 100% sure about the risks involved in flashing your device. We is not responsible for any damage caused by following this guide.

This Samsung android device is released on 2015, September. and available only on Australia, Africa, UAE. Samsung GALAXY J1 ACE (J110F) is the smartphone with 4,3 Inchi Super AMOLED capacitive touchscreen, 16M colors, work on Android OS, v4.4.4 (KitKat), with Quad-core 1.2 GHz CPU, combined with 1 GB of RAM and 5 MP of  Main camera and 2 MP on secondary camera. 

Flashing process in android Smartphone is like reinstall process on windows computer PC, with flash your Samsung GALAXY J1 ACE (J110F) android device you can unbrick, downgrade, manually upgrade (instead of updating via OTA or Samsung Smart Switch), or restore Samsungs stock firmware instead of custom ROM. I make this guide just for you as user all Samsung GALAXY J1 ACE (J110F) variant.

You need to read this guide carefully, so you can get the best result flashing on your Samsung GALAXY J1 ACE (J110F). Cause you need to download necessary file, you must ensure that you have good internet connection in your computer device, this guide using a windows computer.

Initial Step To Flash Samsung GALAXY J1 ACE (J110F) 

Now, we have reached on beginning guide, so you must to do initial step to ensure everything run smoothly.

1. Make sure your Samsung GALAXY J1 ACE (J110F) battery is not in a low battery state, a minimum of 80%. If the battery runs out in the middle of the Root, it can lead to failure
2. Always perform backup your important data before flashing process, Cause this process will delete or erase the data in memory.
3. Make sure you have installed a Latest of Driver Samsung  that support with your Smartphone, If you dont have, please download here< /a>
4. Original USB cable driver for your Samsung GALAXY J1 ACE (J110F)
5. Download Samsung Smart Switch, Here
6. Download Odin V3.10.7, Here
7. Download Official firmware file for the model number of your device, download it from - SamMobile, or you can visit the other site, Here

Main Guide To Flash Samsung GALAXY J1 ACE (J110F) 

1. You must download all necessary file.(Samsung USB driver or Smart Switch and Odin)
2. Then you must install all driver or samsung smart switch to your computer or PC.
3. Extraxt Od in V3.10.7. file on the destination folder.
4. To download Samsung firmware you must visit this link, you can download specific firmware file for your device model number. you must Log In with your registered account on this website.
   
   

   

   sammobile website Log In

5. On the row menu at the top of page, you can select firmware.

   

   sammobile website GALAXY J1 ACE (J110F)

6. Then you must enter in search bar with your phone model number.

   

    Flash Stock ROM Samsung GALAXY J1 ACE (J110F)
7. Then select your country.

   

   Flash Stock ROM Samsung GALAXY J1 ACE (J110F)
8. Then you click on appear link.
9. Select regular download.

   

   Flash Stock Firmware On Samsung GALAXY J1 ACE (J110F)
10. And Donwload button again. Approximately file size is 1,6 GB
11. Wait untill your file finish downloaded, after that you must extract all firmware file on specific folder on your computer.
12. This is your file.

    

    Flash Stock Firmware On Samsung GALAXY J1 ACE (J1 10F)

13. Switch Off your Samsung GALAXY J1 ACE (J110F) to start flashing process.
14. Then, you must run Odin3 v3.10.7 by right click on Odin.exe and select Run as Administrator.

    

    Flash Stock Firmware On Samsung GALA XY J1 ACE (J110F)

15. When program is running, now you can click AP, and navigate to the *.tar or *.tar.md5 firmware file.

    

    Flash Stock Firmware On Samsung GALAXY J1 ACE (J110F)

16. Now your firmware file has been inserte d in Odin3 

    

    Flash Stock Firmware On Samsung GALAXY J1 ACE (J110F)

17. Then, Enter download mode your Samsung GALAXY J1 ACE (J110F) by pressing and hold Volume Down Button + Home Button + Power Button. Hold and press all butt on untill your phone vibrate and LCD show menu.
    
    
    Download mode Samsung GALAXY J1 ACE (J110F)

    
18. And you will see picture like this on your LCD screen.



Download Mode GALAXY J1 ACE (J110F)

19. On this mode, now you must connect your Samsung GALAXY J1 ACE (J110F) to your PC / laptop using a USB cable. 
20. After your phone connected, you will see a message appear that show your device added and there is info on the ID: COM at top left corner. Keep in mind for this COM vary depending on the PC / Laptop. Just Ignore all, in this picture you will see that your device is detected on (COM 5)

    

    Port Com samsung GALAXY J1 ACE (J110F)

21. Make sure re-partition is NOT ticked
22. When everything already you can click Start Button. at the bottom left corner
23. Just wait for the process to run about 2-5 minutes, and make sure there is no interference in this process. 
24. When complete it will display a notification PASS and your smartphoneSamsung GALAXY J1 ACE (J110F) will automatically restart.
25. Wait your device to boot u p, it will take a while.
26. When your Samsung GALAXY J1 ACE (J110F) is ready to use, you can check your firmware update version by dial *#1234# on dial pad.

    

    dial pad samsung GALAXY J1 ACE (J110F)

27. And you will see your new firmware ver sion.

    

    firmware version samsung GALAXY J1 ACE (J110F)

28. Finish.




Warning.

Never disconnect the USB cable while fla shing process is running.
Install Samsung Mobile Driver or Samsung Smart Switch if you dont see a sign in Odin.
Flash your Samsung GALAXY J1 ACE (J110F) device at your own risk.
Flashing firmwares which contains more than one *.tar.md5 file will wipe all data on internal storage.  Flashing official/stock firmware wont increase the binary flash nor KNOX WARRANTY VOID counter and wont cancel the Samsung GALAXY J1 ACE (J110F) devices warranty.